Gloria Engineering Pune.

LASER CUTTING MACHINE

Laser cutting is a technology that uses a laser to cut materials, and is typically used for industrial manufacturing applications, but is also starting to be used by schools, small businesses, and hobbyists. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser optics and CNC (computer numerical control) are used to direct the material or the laser beam generated. A typical commercial laser for cutting materials would involve a motion control system to follow a CNC or G-code of the pattern to be cut onto the material. The focused laser beam is directed at the material, which then either melts, burns, vaporizes away, or is blown away by a jet of gas, leaving an edge with a high-quality surface finish. Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials. Generation of the laser beam involves stimulating a lasing material by electrical discharges or lamps within a closed container. As the lasing material is stimulated, the beam is reflected internally by means of a partial mirror, until it achieves sufficient energy to escape as a stream of monochromatic coherent light. Mirrors or fiber optics are typically used to direct the coherent light to a lens, which focuses the light at the work zone. The narrowest part of the focused beam is generally less than 0.0125 inches (0.32 mm). in diameter. Depending upon material thickness, kerf widths as small as 0.004 inches (0.10 mm) are possible. In order to be able to start cutting from somewhere other than the edge, a pierce is done before every cut. Piercing usually involves a high-power pulsed laser beam which slowly makes a hole in the material, taking around 5â€“15 seconds for 0.5-inch-thick (13 mm) stainless steel, for example. The parallel rays of coherent light from the laser source often fall in the range between 0.06â€“0.08 inches (1.5â€“2.0 mm) in diameter. This beam is normally focused and intensified by a lens or a mirror to a very small spot of about 0.001 inches (0.025 mm) to create a very intense laser beam. In order to achieve the smoothest possible finish during contour cutting, the direction of beam polarization must be rotated as it goes around the periphery of a contoured workpiece. For sheet metal cutting, the focal length is usually 1.5â€“3 inches (38â€“76 mm). Advantages of laser cutting over mechanical cutting include easier workholding and reduced contamination of workpiece (since there is no cutting edge which can become contaminated by the material or contaminate the material). Precision may be better, since the laser beam does not wear during the process. There is also a reduced chance of warping the material that is being cut, as laser systems have a small heat-affected zone. Some materials are also very difficult or impossible to cut by more traditional means. Laser cutting for metals has the advantages over plasma cutting of being more precise and using less energy when cutting sheet metal; however, most industrial lasers cannot cut through the greater metal thickness that plasma can. Newer lasers machines operating at higher power (6000 watts, as contrasted with early laser cutting machines' 1500 watt ratings) are approaching plasma machines in their ability to cut through thick materials, but the capital cost of such machines is much higher than that of plasma cutting machines capable of cutting thick materials like steel plate.

Destination Name	Hotels,Resorts List (click on below Link)
Alibaug	Click For Alibaug Hotels and Resorts.
Kashid	Click For Kashid Hotels and Resorts.
Murud Janjira	Click For Murud janjira Hotels and Resorts.
Nagaon	Click For Nagaon Hotels and Resorts.
Diveagar	Click For Diveagar Hotels and Resorts.
Harihareshwar	Click For Harihareshwar Hotels and Resorts.
Shrivardhan	Click For Shrivardhan Hotels and Resorts.
Mahad	Click For Mahad Hotels and Resorts.
Dapoli	Click For Dapoli Hotels and Resorts.
Chiplun	Click For Chiplun Hotels and Resorts.
Guhagar	Click For Guhagar Hotels and Resorts.
Kankavli	Click For Kankavli Hotels and Resorts.
Sawantwadi	Click For Sawantwadi Hotels and Resorts.
Ganpatipule	Click For Ganpatipule Hotels and Resorts.
Ratnagiri	Click For Ratnagiri Hotels and Resorts.
Malvan	Click For Malvan Hotels and Resorts.
Tarkarli	Click For Tarkarli Hotels and Resorts.
Kudal	Click For Kudal Hotels and Resorts.
Karnala	Click For Karnala Hotels and Resorts.
Mahabaleshwar	Click For Mahabaleshwar Hotels and Resorts.
Panchgani	Click For Panchgani Hotels and Resorts.
Lonavala	Click For Lonavala Hotels and Resorts.
Matheran	Click For Matheran Hotels and Resorts.
Panhala	Click For Panhala Hotels and Resorts.
Tapola	Click For Tapola Hotels and Resorts.
Mulshi	Click For Mulshi Hotels and Resorts.
Panshet	Click For Panshet Hotels and Resorts.
Bhandardara	Click For Bhandardara Hotels and Resorts.
Sinhagad	Click For Sinhagad Hotels and Resorts.
Lavasa	Click For Lavasa Hotels and Resorts.
Karjat	Click For Karjat Hotels and Resorts.
Malshej Ghat	Click For Malshej Ghat Hotels and Resorts.
Shirdi	Click For Shirdi Hotels and Resorts.
Jyotiba temple	Click For Jyotiba temple Hotels and Resorts.
Gadhinglaj	Click For Gadhinglaj Hotels and Resorts.
Kunkeshwar	Click For Kunkeshwar Hotels and Resorts.
Amba	Click For Amba Hotels and Resorts.
Amboli	Click For Amboli Hotels and Resorts.
Aare Ware	Click For Aare Ware Hotels and Resorts.
Ajara	Click For Ajara Hotels and Resorts.
Akshi	Click For Akshi Hotels and Resorts.
Anjarle	Click For Anjarle Hotels and Resorts.
Aravi Beach	Click For Aravi Beach Hotels and Resorts.
Arnala Beach	Click For Arnala Beach Hotels and Resorts.
Devbaug	Click For Devbaug Hotels and Resorts.
Devgad	Click For Devgad Hotels and Resorts.
Devrukh	Click For Devrukh Hotels and Resorts.
Gaganbawada	Click For Gaganbawada Hotels and Resorts.
Harnai	Click For Harnai Hotels and Resorts.
Kaas Pathar	Click For Kaas Pathar Hotels and Resorts.
Karde	Click For Karde Hotels and Resorts.
Kelshi	Click For Kelshi Hotels and Resorts.
Khalapur	Click For Khalapur Hotels and Resorts.
Khed	Click For Khed Hotels and Resorts.
Kihim	Click For Kihim Hotels and Resorts.
Kolad	Click For Kolad Hotels and Resorts.
Kolthare	Click For Kolthare Hotels and Resorts.
Kondura	Click For Kondura Hotels and Resorts.
Koyna Dam	Click For Koyna Dam Hotels and Resorts.
Ladghar	Click For Ladghar Hotels and Resorts.
Lanja	Click For Lanja Hotels and Resorts.
Mangaon	Click For Mangaon Hotels and Resorts.
Murud	Click For Murud Hotels and Resorts.
Nagothane	Click For Nagothane Hotels and Resorts.
Narsobawadi	Click For Narsobawadi Hotels and Resorts.
Pawas	Click For Pawas Hotels and Resorts.
Phansad	Click For Phansad Hotels and Resorts.
Poladpur	Click For Poladpur Hotels and Resorts.
Rajapur	Click For Rajapur Hotels and Resorts.
Revdanda	Click For Revdanda Hotels and Resorts.
Roha	Click For Roha Hotels and Resorts.
Sangameshwar	Click For Sangameshwar Hotels and Resorts.
Sasawane	Click For Sasawane Hotels and Resorts.
Shiroda	Click For Shiroda Hotels and Resorts.
Sindhudurg	Click For Sindhudurg Hotels and Resorts.
Varsoli	Click For Varsoli Hotels and Resorts.
Velas	Click For Velas Hotels and Resorts.
Mandangad	Click For Mandangad Hotels and Resorts.
Velneshwar	Click For Velneshwar Hotels and Resorts.
Vengurla	Click For Vengurla Hotels and Resorts.
Hedvi	Click For Hedvi Hotels and Resorts.

LASER CUTTING MACHINE

Destinations in Konkan